Home » Shop » STOCK » 10U 104HP GREY coloured Eurorack case
Brand

Finish

Brown coloured linseed oil

Material

Rails colour

Aluminum rails (included)

10U 104HP GREY coloured Eurorack case

Original price was: €935.Current price is: €558.

Solid ash with coloured linseed oil:

This 10U 104HP Eurorack case has been made of solid ash wood as a base material, a light colored and smooth-grained wood type. The ash wood is perfect for the coloured linseed oil I use, a natural finish based on pure linseed oil & natural pigments.

This one will look stunning if you fill it with (mainly or perhaps OCD-only?!) aluminum faceplate modules like the classic Doepfer series, Intellijel, Mutable Instruments, some Make Noise modules,  Shakmat modules, etc.

Power:

There has not been power installed (yet) so free to choose Meanwell RT65B either DIY or pre-wired or one of the Konstantlab PSU’s with an external adapter.

Dimensions:

346mm deep and 387mm high, 104HP = 530mm + 2x 12mm sides = 554mm wide

For other widths and/or other models of cases, check out my configurator!

This case is part of a series of unique Eurorack cases in various wood colours & types and unique coloured Eurorack rails. Each case is one-of-a-kind, specially made for the presentation at Superbooth Berlin in May 2024. They have been presented in Berlin, used as showmodels and presented at Dutch Modular Fest Most are perfect as they have been carefully transported, but they might have tiny scratches or small dents but they are as good as new .. however, since I make most of my cases on order and custom, you get quite a nice discount on these stock items!

Case
The price for the basic cas is +20% due to the use of solid ashwood (instead of oak which I normally use)
1 × eurorack size - 10U VCS3 style, 104HP
Original price was: €642.Current price is: €482.
Solid ash wood
This additional fee is due to the use of solid ash (instead of oak which I normally use)
Placeholder
1 × Solid ash - 104HP
Original price was: €104.Current price is: €0.
Wood finish
Custom colour wood finish as displayed, with coloured linseed oil onto the solid ash wood
1 × wood finish - Custom-colour
Original price was: €99.Current price is: €0.
Inserts
4 × inserts - 104HP pair of M3 threaded inserts
19
Power supply

The Meanwell RT-65B is a low cost and efficient power supply, giving loads of power for a good price. By far the most popular and most sold PSU for Eurorack. The PSU's always come mounted to the case. The power is either DIY or pre-wired on all low-voltage wires & ground. The final connection from the socket to the PSU has to be done by yourselves (no soldering, only cable stripping & a few screws).

RT-65B Specs: +12V 3.5A -12V 1.0A and 5V 8.0A, total output power 65W.


Alternativelly there are also 2 options by Konstantlab:
HammerPWR & SeventyPWR are externally powered from a power brick. This creates the option to fully wire the system for you and ready to go, since there is no high voltage inside the case. These power supplies have been developped for Eurorack specifically, are known for their power & low noise but to come at a cost.

- HammerPWR (100 Watt output) + MeanWell 120Watt adapter, +12V 5A (2x 2.5A), -12V 2.5A and +5V 2.0A

- SeventyPWR (70 Watt output) + MeanWell 90 Watt adapter, +12V 2.5A, -12V 2.5A, +5V 2.0A


Calculation power output example based on ModularGrid:
(1.6A on +12V = 19,2W) + (0.8A on -12V = 9,6W) + (0.1A on 5V = 0,5) = Total output power of 29,3 Watt

Qty:-+
Power cable
Bussboards

Power to your modules are supplied by bussboards
When you select a MeanWell PSU you'll get the Modular Synth Lab Bussboards with 20 headers, when you select a HammerPWR or SeventyPWR you automatically get the Konstantlab's filtered bussboards with 19 connectors each.

Recommended to have a maximum of 3 or 4 bussboards per PSU.

Choose for a DIY cable kit and assemble it yourselves/with local help. or choose for a system where all low-voltage cables have been pre-wired! For the HammerPWR & SeventyPWR PSU this means that the case is ready to go, with the Meanwell RT65B you'll only need to connect the socket(s) to the PSU('s).

Qty:-+
Power socket
Placeholder
1 × power socket - Socket in back plate
Original price was: €14.Current price is: €0.
Shipping box (optional)
Alternatively to the shipping crates, I now also offer super-strong triple-layered cardboard boxes for the smaller cases. The case itself is packed inside with foam blocks. Quite a good solution for international transport!

Only 1 in stock