Widths
These are (my) standard HP sizes:
- 60HP = 306mm + 2x 12mm sides = 330mm
- 84HP = 428mm + 2x 12mm sides = 452mm
- 104HP = 530mm + 2x 12mm sides = 554mm
- 126HP = 642mm + 2x 12mm sides = 666mm
- 160HP = 814mm + 2x 12mm sides = 838mm
- 196HP = 997mm + 2x 12mm sides = 1021mm
- I cut the rails to size myself, so other HP possible on request
BLACK FRIDAY 6U 60HP Eurorack case
configurator
It was Friday .. I was oiling black … I couldn’t resist making a few more 🙂 From stock so available right after power install within a week or two.
Standard the rails is in aluminum colour, but optionally it can be replaced by a black version.
Please select a multitude of this per 1U or 3U row, so if you order a 9U case you'll have 3x 3u = 3 rows x black surplus.
For the M3 slide nuts, you can select them as a multitude of 20 pcs, just select roughly how many you would like in your complete case and they will be distributed accordingly.
For the threaded inserts you need to select the number of pairs you need per 1U or 3U row; so with 3U just 1x, with 6U you'll need 2x, etc. Note that the inserts have a maximum length from the factory, so with larger cases they can be build up out of two pieces.
The Meanwell RT-65B is a low cost and efficient power supply, giving loads of power for a good price. By far the most popular and most sold PSU for Eurorack. The PSU's always come mounted to the case. The power is either DIY or pre-wired on all low-voltage wires & ground. The final connection from the socket to the PSU has to be done by yourselves (no soldering, only cable stripping & a few screws).
RT-65B Specs: +12V 3.5A -12V 1.0A and 5V 8.0A, total output power 65W.
Alternativelly there are also 2 options by Konstantlab:
HammerPWR & SeventyPWR are externally powered from a power brick. This creates the option to fully wire the system for you and ready to go, since there is no high voltage inside the case. These power supplies have been developped for Eurorack specifically, are known for their power & low noise but to come at a cost.
- HammerPWR (100 Watt output) + MeanWell 120Watt adapter, +12V 5A (2x 2.5A), -12V 2.5A and +5V 2.0A
- SeventyPWR (70 Watt output) + MeanWell 90 Watt adapter, +12V 2.5A, -12V 2.5A, +5V 2.0A
Power to your modules are supplied by bussboards
When you select a MeanWell PSU you'll get the Modular Synth Lab Bussboards with 20 headers, when you select a HammerPWR or SeventyPWR you automatically get the Konstantlab's filtered bussboards with 19 connectors each.
Recommended to have a maximum of 3 or 4 bussboards per PSU.
Choose for a DIY cable kit and assemble it yourselves/with local help. or choose for a system where all low-voltage cables have been pre-wired! For the HammerPWR & SeventyPWR PSU this means that the case is ready to go, with the Meanwell RT65B you'll only need to connect the socket(s) to the PSU('s).
Only 1 in stock
Related Products
Made to order
Select options This product has multiple variants. The options may be chosen on the product pagePart | |
---|---|
Material | |
Brand | |
Synth |