This is a configurable setup for a solid Oak stand, containing the Keystep Pro in front and Eurorack rows above!
Since all orders are made-to-order, you can select all options here and see how they inflict the price. Production is planned according to a FiFo system, first in – first out, in the order they come in.
Custom sizes and configurations are possible on request, so do not hesitate to contact me if you have a request!
Especially nice with the brass coloured threaded inserts!
Select the type and amount of inserts you need here:,
For the threaded inserts you need to select the number of sets you need per 3U; so with 3U just 1x, with 6U you'll need 2x, with 9U it is 3x and with the 12U case you need 4x selected and then 5x with the 15U case. (NOTE: due to availability at my suppliers, brass threaded strips are not available but only the steel version and even there stock is limited.
For the M3 slide nuts you can select them as a multitude of 20 pcs, just select how many you would like in your complete case.
The Meanwell RT-65B is a low cost and efficient power supply, giving loads of power for a good price. The PSU's always come mounted to the case. The power is either DIY or pre-wired on all low-voltage wires & ground. The final connection from the socket to the PSU has to be done by yourselves (no soldering, only cable stripping & a few screws).
RT-65B Specs: +12V 3.5A -12V 1.0A and 5V 8.0A, total output power 65W.
Calculation power output example based on ModularGrid:
(1.6A on +12V = 19,2W) + (0.8A on -12V = 9,6W) + (0.1A on 5V = 0,5) = Total output power of 29,3 Watt
Power to your modules are supplied by the ModularSynthLab bussboards, with 20 connector each (cut to size on caes smaller then 84HP).
Recommended to have a maximum of 3 bussboards per PSU.
Choose for a DIY cable kit and assemble it yourselves/with local help. or choose for a system where all low-voltage cables have been pre-wired! With the Meanwell RT65B you'll only need to connect the socket(s) to the PSU('s).
1 power socket for 3x MeanWell PSU's max. to not exceed the 10A fuse, otherwise select multiple.
Soldering is not needed, since all comes pre-soldered and ready to patch! You only need patch cables to go from the back of your Keystep to the patch panel. It can be positioned vertical in a 3U row or horizontal in a 1U row.
Made to order (currently estimated 4 to 8 weeks)