Keystep Pro + Eurorack

configurator

This is a configurable setup for a solid Oak stand, containing the Keystep Pro in front and Eurorack rows above!

Since all orders are made-to-order, you can select all options here and see how they inflict the price. Production is planned according to a FiFo system, first in – first out, in the order they come in.

Custom sizes and configurations are possible on request, so do not hesitate to contact me if you have a request!

Combination
Keystep Pro patch panel
Solid Oak patch panel to outbreak the patch cables on the back of your Keystep Pro to your Eurorack. Included are the mini-jack sockets, but NOT the cables and soldering, that you will have to do yourselves. It is quite easy and you can simply use any normal patch cable for it, cut it in two and you'll have two cables to solder allready.
Rails colour
Standard the rails is in aluminum colour, but optionally it ca be replaced by a black version.
Especially nice with the brass coloured threaded inserts!
Rails insert
Select the type and amount of inserts you need here:
For the threaded inserts you need to select the number of sets you need per 3U; so with 3U just 1x, with 6U you'll need 2x, with 9U it is 3x and with the 12U case you need 4x selected and then 5x with the 15U case.
For the M3 slide nuts you can select them as a multitude of 20 pcs, just select how many you would like in your complete case.
Qty:-+
Power supply
For power there is combination of ModularSynthLab bussboards (20 connectors) together with a RT65B PSU from MeanWell (giving +12V 2800 - 3500mA -12V 500 - 1000mA and 5V 5000 - 8000mA). When ordered these are attached to the case; either with a DIY cable kit (no soldering, only cable stripping and screws) or fully assembled.
NOTE: Power assembly not possible for US customers, only a DIY kit is available then.
Some scenario's as a guideline since every case and every assembly of units is different: a 6U case of 84HP can easily go with 1 bussboard and 1 PSU power-wise, but for comfort 2 might be better. For sure consider a bussboard per row for wider cases of 104HP and more. For 126HP (or more) we recommend 1 PSU and 1 bussboard per row to be on the safe side.
Qty:-+
Oak finish
This is the finish applied to all the solid Oak parts in the case.
Power socket
1 power socket for 3 PSU's max to not exceed the 10A fuse, otherwise select multiple!
A power socket with an integrated 10A fuse, build into the backplate of the case. (Also possible to order without PSU or bussboards if you arrange these yourselves/already have these)
Qty:-+
Power cable
AC Power Cable – 1,5m long, max. 250VAC
Qty:-+
Shipping crate (optional)
Mandatory for all overseas shipping and highly recommended within Europe.
Custom amount
You can select this when we had contact about custom work, otherwise just leave it empty :-)
Qty:-+

Made to order (currently estimated 3-4 weeks)