Home » Shop » Eurorack » 13U VCS style case in 60HP (stock)
Brand

Finish

Brown coloured linseed oil
Material

Rails colour

Aluminum rails (included)

13U VCS style case in 60HP (stock)

Original price was: €597.Current price is: €485.

This 13U 60HP Eurorack case has been made of solid oak with a clean vertical wood pattern and the signature air-slots on the sides. The nice thing with this 13U shape is that you’ll have a more horizontal part in front for your sequencers, etc. as a more hands-on section and with a relativelly narrow profile have plenty of vertical space for oscilators, effects & funcitons upwards.

It is available from stock as we made a series of this 13U cases in variation of the 10U VCS-style case.

It has been finished with the natural clean Osmo hardwax oil 3041 which has a little white pigment in it so it colours mostly like nicely untreated oak-wood, whilst having a good coat protection.

Rails colour is standard aluminum, but can optionally be black.

Power is still open as well, go for the (cheaper) Meanwell RT65B or get a SeventyPWR or HammerPWR by Konstantlab in combination with their bussboards. Benefit here is that I can fully wire the case for you, ready to patch. Do note that with 60HP I’ll get their (new) compact pocket bussboards due to the 60HP width.

Power socket is allready pre-cut in the back.

Dimensions:

346mm deep and 522mm high, 60HP = 306mm + 2x 12mm sides = 330mm wide

For other widths and/or other models of cases, check out my configurator!

Case
Placeholder
1 × eurorack size - 13U (4x 3U, 1x 1U), 60HP
Original price was: €462.Current price is: €393.
Wood finish
Custom colour wood finish as displayed, with coloured linseed oil onto the solid ash wood
1 × wood finish - Osmo hardwax oil
Original price was: €29.Current price is: €0.
Rails colour
This is an additional fee per 1U or 3U row for the coloured rails
Inserts
5 × inserts 1U or 3U pair - 60HP pair of M3 inserts or smaller
€12
Power supply

The Meanwell RT-65B is a low cost and efficient power supply, giving loads of power for a good price. By far the most popular and most sold PSU for Eurorack. The PSU's always come mounted to the case. The power is either DIY or pre-wired on all low-voltage wires & ground. The final connection from the socket to the PSU has to be done by yourselves (no soldering, only cable stripping & a few screws).

RT-65B Specs: +12V 3.5A -12V 1.0A and 5V 8.0A, total output power 65W.


Alternativelly there are also 2 options by Konstantlab:
HammerPWR & SeventyPWR are externally powered from a power brick. This creates the option to fully wire the system for you and ready to go, since there is no high voltage inside the case. These power supplies have been developped for Eurorack specifically, are known for their power & low noise but to come at a cost.

- HammerPWR (100 Watt output) + MeanWell 120Watt adapter, +12V 5A (2x 2.5A), -12V 2.5A and +5V 2.0A

- SeventyPWR (70 Watt output) + MeanWell 90 Watt adapter, +12V 2.5A, -12V 2.5A, +5V 2.0A

Bussboards
Power to your modules are supplied by bussboards
With the SeventyPWR you get the Konstantlab's filtered bussboards with 19 connectors each.
Qty:-+
Power socket
Placeholder
1 × power socket - Socket in back plate
Original price was: €14.Current price is: €0.
Shipping box (optional)
Alternatively to the shipping crates, I now also offer super-strong triple-layered cardboard boxes for the smaller cases. The case itself is packed inside with foam blocks. Quite a good solution for international transport!

Only 1 in stock