Home » Shop » Eurorack » 9U 60HP case with ‘turing pattern’ (stock)
Brand

Finish

Brown coloured linseed oil
Material

Rails colour

Aluminum rails (included)

9U 60HP case with ‘turing pattern’ (stock)

€499

Still work in progress .. but I wanted to put it online and make it available to order 🙂

Power is still open, you can go for the (cheaper) Meanwell RT65B and 1 or 2 bussboards and install the power yourselves, or go for high-quality Konstantlab power and we’ll put their brand new CompactPWR in it with integrated 20 sockets. CompactPWR is an active bus board that combines power generation and distribution, delivering 35W of clean power (1250mA on +12V and -12V rails, 1000mA on +5V).

Power socket is allready pre-cut in the back.

For other widths and/or other models of cases, check out my configurator!

Case
1 × eurorack size - 9U (3x 3U), 60HP
€277
Wood finish
Custom colour wood finish as displayed, with coloured linseed oil onto the solid ash wood
1 × wood finish - Osmo hardwax oil
€29
Rails colour
This is an additional fee per 1U or 3U row for the coloured rails
Placeholder
3 × Black rails 1U or 3U pair - 60HP
€5
Inserts
3 × inserts 1U or 3U pair - 60HP pair of M3 inserts or smaller
€12
Power supply

The Meanwell RT-65B is a low cost and efficient power supply, giving loads of power for a good price. By far the most popular and most sold PSU for Eurorack. The PSU's always come mounted to the case. The power is either DIY or pre-wired on all low-voltage wires & ground. The final connection from the socket to the PSU has to be done by yourselves (no soldering, only cable stripping & a few screws).

RT-65B Specs: +12V 3.5A -12V 1.0A and 5V 8.0A, total output power 65W.


Alternativelly there are also 2 options by Konstantlab:
HammerPWR & SeventyPWR are externally powered from a power brick. This creates the option to fully wire the system for you and ready to go, since there is no high voltage inside the case. These power supplies have been developped for Eurorack specifically, are known for their power & low noise but to come at a cost.

- HammerPWR (100 Watt output) + MeanWell 120Watt adapter, +12V 5A (2x 2.5A), -12V 2.5A and +5V 2.0A

- SeventyPWR (70 Watt output) + MeanWell 90 Watt adapter, +12V 2.5A, -12V 2.5A, +5V 2.0A

Bussboards
Power to your modules are supplied by bussboards
With the SeventyPWR you get the Konstantlab's filtered bussboards with 19 connectors each.
Qty:-+
Power socket
Placeholder
1 × power socket - Socket in back plate
€14
Custom work
This is an added fee for the 3 hours of laser-engraving on the case!
Placeholder
10 × custom amount - 10 euro x ... for custom options
€10
Shipping box
Alternatively to the shipping crates, I now also offer super-strong triple-layered cardboard boxes for the smaller cases. The case itself is packed inside with foam blocks. Quite a good solution for international transport!

Only 1 in stock ...