10U 104HP RED coloured Eurorack case with RED rails (Superbooth Special Edition)
€1.062
SUPERBOOTH SPECIAL EDITIONS: A series of unique Eurorack cases in various wood colours & types and unique coloured Eurorack rails. Each case is one-of-a-kind, specially made for the presentation at Superbooth Berlin from May 16-18. (Pickup in Berlin possible, Saturday at the end of the day)
Solid oak with coloured linseed oil:
This 10U 104HP Eurorack case has been made of solid oak wood as a base material, perfect for the coloured red inseed oil I use, a natural finish based on pure linseed oil & natural pigments.
Coloured aluminum rails:
To make this case even more special I commissioned colour-anodized eurorack rails! This perfectly complements the wood and make it a unique and one-of-a-kind case!
Power:
On this case there has been a Meanwell RT65B installed with 3 Modular Synth Lab bussboards. It comes with a DIY cable kit to wire it yourselves, instructions can be found here.
Dimensions:
346mm deep and 387mm high, 104HP = 530mm + 2x 12mm sides = 554mm wide
p.s. One small ‘mistake’ we made in production, the ‘ventilation slots’ & logoin the left sidepanel are tiled 90 degrees 🙂 Oops!
For other widths and/or other models of cases, check out my configurator!
The Meanwell RT-65B is a low cost and efficient power supply, giving loads of power for a good price. By far the most popular and most sold PSU for Eurorack. The PSU's always come mounted to the case. The power is either DIY or pre-wired on all low-voltage wires & ground. The final connection from the socket to the PSU has to be done by yourselves (no soldering, only cable stripping & a few screws).
RT-65B Specs: +12V 3.5A -12V 1.0A and 5V 8.0A, total output power 65W.
Power to your modules are supplied by bussboards
When you select a MeanWell PSU you'll get the Modular Synth Lab Bussboards with 20 headers each. All low-voltage cables are pre-wired and with the Meanwell RT65B you'll only need to connect the socket(s) to the PSU('s).
1 in stock for quick delivery!